DYCOR Relay Driver Board

Provides a driving current of 5 – 500 mA loads at voltages from 10 – 20 VDC for Datataker digital outputs.


Category: SKU: 100-0504-1


The DYCOR Relay Driver Board takes digital output signals from a data logger/controller and signal conditions them to drive 5 mA to 500 mA loads at voltages from 10 to 30 VDC. Loads can be a LED or a 12 to 24 VDC relay coil. The sum total current consumption must not exceed 1.6 Amps per driver board to avoid damaging the solid state relay driver. Outputs can be paralleled for more current drive if 500 mA is not enough.